Contents

Security

• Warning words
• Hazard warning sign
• Important safety information
• Information messages
• Run a security program
• Operator qualification
• Fire fighting measures
• Fire and explosion prevention
• Fire extinguisher
• Burn prevention
• Coolant
• Fluid jet injury
• Batteries
• Information on common hazards
• Compressed air
• Information on asbestos
• Preventing being struck by lightning during a thunderstorm
• Getting on and off the car
• Before starting the engine
• Starting the engine
• Before you start
• Operation
• Parking
• Operator's workplace
• Prevention of bruises and cuts
• Roll over protective structure (ROPS)
• Falling object protective structure (FOPS)
• Rotating drive shafts
• Oils
• Lines, pipes and hoses
• Warning signs and labels
• Side view
• Back view

General information

• Machine identification
• Product identification information

Operation

• Starting the engine
• Pre-launch checks
• Starting the engine
• External inspection
• General check
• Heating and air conditioning controls
• Hydraulic controls
• Wiper and washer controls
• Steering wheel
• Transmission control
• Machine part protection concept (MSPS)
• Hand brake lever
• Parking brake
• Brake control
• Creeper pedal (clutch)
• Retarder (if installed)
• Fuel management
• Hydraulic trailer brakes (if fitted)
• Steering and attachment systems
• On the instrument panel
• Light switches
• Engine start switch
• Instruments and controls
• Starting the engine from an external power source using wires
• Electrical system
• Connector for connecting a radar sensor
• Radar sensor
• Ground speed radar
• Assigning helper functions
• Applications
• Terminal settings
• Setting the time and date
• Setting the display of decimal units
• Language settings
• Setting units
• Virtual terminal version information
• Virtual terminal
• Monitor mount
• Armrest adjustment
• Compartments for storing personal belongings and documents
• Windows
• Mirrors
• Hydraulic system
• Drawbar adjustment
• Transport chain
• Drawbar pin
• Drawbar
• Lifting aid for 3-point hitch
• Removing Attachments
• Attachment installation
• Attachment leveling
• Transporting equipment on a three-point hitch
• External raise/lower switch
• 3-point hitch lift/work switch
• Control lever
• Three-point hitch (if equipped)
• Air hose connection
• Air compressor (accessory)
• ISO 11783 connector
• Trailer socket
• Attachment wiring
• Power supply
• Electrical connectors
• Single-pole connectors
• Battery switch
• Fuse panel
• Basic hydraulic connections
• Hydraulic power take-off unit for external consumers (optional equipment)
• Power take-off (PTO) (accessory)
• PTO
• IOM work
• Operator's seat
• Standard seat
• Comfort seat
• Seat belts and instructor seat
• Using differential lock
• Towing and transport
• Vehicle driving on roads
• Basic towing rules
• Towing a stuck car
• Towing a car with a failed engine
• Best Practices
• Ballasting recommendations
• General recommendations
• Tire pressure
• Suppression of resonant vibrations
• Large vertical hitch loads
• Ballasting calculation sheet MT900C
• Tables
• Tire inflation tips
• Vehicles without radar
• Performing special work
• Drawbars and hitches
• Ballasting
• Tractor ballasting for trailed scrapers
• Working with trailed scraper
• Aftermarket equipment
• Hanging chemical tanks

Lubrication and maintenance

• Changing the hydraulic oil in the attachment system
• How to check the oil level
• Hydraulic system
• Procedure for changing the oil in the power transmission system
• How to drain oil from the power train
• Checking the level with the engine running
• Checking the oil level in the power train
• Procedure for checking the oil level in the power train
• Breather (transmissions) - cleaning
• Power transmission
• Articulation lock
• Every 3000 hours
• Every 2000 hours
• Every 1000 hours
• Every 500 hours
• After the first 500 hours
• Every 250 hours
• After the first 250 hours
• Every 50 hours or weekly
• Every 10 hours or daily
• As needed
• Maintenance intervals
• Standard tightening torques for metric fasteners
• Standard tightening torques for inch fasteners
• Hose clamps with constant torque
• Torques
• Refueling capacity
• Viscosity of lubricants
• Viscosity of lubricants and filling capacity
• Cleaning the cores of the cooling unit
• Cooling system
• Circuit breakers (electronic control units - ECU)
• Main fuse
• Main fuse panel
• Batteries
• Electrical system
• Installing the V-ribbed belt
• Removing the V-ribbed belt
• Replacing the V-ribbed belt
• Primary cleaner
• Installing air cleaner filters
• Secondary filter element
• Primary filter element
• Engine air filters
• Changing the engine oil and filter
• Checking the engine oil level
• Engine crankcase
• Ether injection device for easy starting
• Adding hydraulic oil to the implement system
• Attachment system oil filter
• Checking the coolant level
• Draining the coolant from the system
• Filling the system
• Replacing the liquid in the cooling system
• Coolant thermostat
• Coolant additives
• Coolant sampling
• Fuel system
• Fuel filler cap
• Fuel filters
• Bleeding the fuel system
• Draining water and sediment from the fuel tank
• Water separator
• Filling the fuel system
• Location of oilers
• Drive shafts
• Steering cylinders
• Articulation pin
• Marker light rod axles
• Cabin air filters
• Cabin air circulation filter
• Cabin air filter
• Charcoal air filter
• Air compressor
• Air tank. Condensate removal
• Removing the tire and rim assembly
• Fitting the tire with rim assembly
• Tightening wheels and counterweights
• Hub clearance
• Removing the hub and flange
• Installing the hub and flange
• 227 kg (500 lb) - wheel weights
• 364 kg (800 lb) - wheel weights

Troubleshooting

• Heating and air conditioning
• Electrical system
• Brakes
• Engine
• Hydraulic system
• Transmission
• Steering system

Specifications

• Specifications
• Transmission
• Electrical system
• Lanterns
• Additional lights
• Brakes
• Hydraulic system
• Steering system
• Drawbar
• Machine dimensions
• Additional dimensions
• Overall width
• Articulation

Additional equipment

• Accessories and optional equipment
• Electrical equipment
• Operator station (not shown)
• Power transmission
• Engine
• Hydraulics
• Other accessories

Index