Contents

Description and operation

• Purpose
• Specifications
• Tractor composition
• Design and operation
• Measuring instruments, tools and accessories
• Marking and sealing
• Packaging

Construction and operation of tractor components

• Controls and instrumentation
• Engine
• Clutch clutch
• Gearbox
• Hydrostatic swing mechanism
• Brakes
• Cardan transmission
• Rear axle
• Final transfer
• Power take-off shaft
• Frame and chassis
• Hinged system
• Cabin air conditioning and heating system
• Air conditioning controls
• Air conditioner operation
• Heating system
• Electrical equipment
• Fuses

Intended use

• General requirements
• Operating limitations
• Preparing the tractor for use
• Safety measures when preparing the tractor
• Preparing the engine for start
• Using the tractor
• Starting the engine
• Starting the engine at low temperatures
• Starting off and driving the tractor
• Tractor turns
• Stopping the tractor
• Stopping the engine
• Running in
• Tractor towing
• PTO use
• Tractor rear hitch control
• Trailer hitch
• How to replace rods and screws on the rear linkage
• Safety requirements for tractor operation
• Fire safety requirements

Maintenance

• Tractor maintenance
• General instructions
• List of fuels and lubricants
• Maintenance after running-in
• Safety requirements during maintenance
• Scheduled maintenance
• Seasonal maintenance (CO)
• Maintenance of tractor components
• Changing the oil in the crankcase
• Replacing the paper filter element (BPE) of the oil filter
• Flushing the coarse fuel filter
• Cleaning the rotors of engine and gearbox centrifugal oil filters
• Draining sediment from the fine fuel filter
• Checking and adjusting engine valve clearances
• Checking the tightening of the cylinder head bolts
• How to remove air from the fuel system
• Air cleaner service
• Turbocharger flushing
• Fuel equipment check
• Adjusting the oil pressure in the engine lubrication system
• Generator test
• Replacing the filter element Regotmas 635-1-19 or EFOM 605-10-19 of the pressure filter of the gearbox control system
• Adjusting the clutch control
• Setting the clearance between the piston and the cylinder piston pusher
• Adjusting the free stroke of the cut
• Filling and bleeding the hydraulic system with brake fluid
• Checking the gearbox oil level
• Rear axle oil level check
• Flushing the gearbox hydraulic strainer
• Replacement of the filter element 0009830615V of the swing hydraulic system
• Transmission centrifuge relief valve adjustment
• Replacement of the filter element "Regotmas 635-1-19" of oil tanks of the hydraulic system and hydraulic system of rotation
• Checking the tightness of the pneumatic system
• Checking the status of the brakes
• Hydraulic oil change
• Replacing the filter elements of the fine fuel filter
• Changing the GSP oil
• Lubrication of rear linkage and towbar slewing shaft bushings
• Gearbox oil change
• Replacing the oil in the rear axle gear
• Diagnostics of malfunctions of the electronic-hydraulic control system of the "BOSCH" attachment device
• How to check and adjust the axial clearance of the bearings of the track rollers
• The procedure for checking and adjusting the axial clearance in the bearings of the idler wheels
• Maintenance and testing of batteries
• Adjusting road headlights
• Track mounting and dismounting
• Track tensioning procedure
• Air conditioning and refrigeration service
• Replacing the filter element (Regotmas 605-1-19) of the pressure filter of the hydraulic system

List of possible faults and instructions for their elimination

Storage rules

• General provisions
• Inter-shift storage rules
• Short-term storage rules
• Long-term storage rules

Transportation

• Change registration sheet